GET IN TOUCH

Mon - Friday 9:00am - 5:00pm

Tel: 01733 234118

sales@graphicsuk.com

Axis Park, 45 Manasty Road,

Orton Southgate,

Peterborough, PE2 6UP

OTHER INFO

Graphics UK is a digital and screen printing company, offering printing services in Peterborough.

©2019 by Graphics UK

  • Facebook
  • Twitter
  • YouTube Social  Icon

Vinyl Application

There are various ways to apply your new stickers to windows or smooth surfaces

SELF CLING VINYL GRAPHICS
There is zero adhesive on the back of these vinyls, therefore slightly different application technique is required.
 

1. CLEAN

Spray the window you’re applying the decal to with soapy water OR window cleaning solution. Clean the window and remove any traces of dirt.
 

2. PREPARE

Once the window is clean and dry. Spray the window again with water and leave the window wet, ready for decal

application.
 

3. PEEL

Carefully peel off the backing paper from the decal.


4. APPLY

Place your decal on the window and use thick or rigid card to GENTLY squeegee all the water out from between the sticker and window.
 

5. FINISH

Ensure all excess water is squeezed out and wiped away - it will take approx 1-2 hours for the sticker to become fully dry and set for display.

SELF ADHESIVE VINYL LETTERING / STICKER
The adhesive can be supplied in different amounts, ultra low tac, low tac, removable, permanent and high tac.
 

1. CLEAN

Spray the window you’re applying the decal to with soapy water OR window cleaning solution. Clean the window and remove any traces of dirt.
 

2. PREPARE

Dry the window - using a clean cloth. Remove dust / dirt before you position your sticker.
 

3. POSITIONING

Measure and place the sticker in the desired location - use masking tape to keep it in place.

4. PEEL

Lift the sticker up and peel the white paper backing off the sticker, be careful not to pull off the masking tape.


5. APPLY

Slowly lower the sticker to the window / wall / surface and apply enough pressure rubbing the vinyl. Ideally use a vinyl squeegee or thick card same size as a credit card.
 

6. FINISH

Wait a few minutes then slowly remove the clear applicatation tape.

Ideally start at a corner and pull away at an angle, if the vinyl decal pulls away form the surface - repeat step 5.